The Washington is a new model effective July 2023 and we are offering this comfortable 2 bedroom unit at an exceptional opening price. This tiny home has 2 bedrooms, 1 bathroom with an opening living space. The front wall and side walls can be reversed during assembly to allow the side entry door on the left or right.  The walls are solid wood using 70mm (2-3/4″) thick wall logs with 4″ x 8″ roof beams. The total footprint is 28′ x 30′  for 840 sq’ of space. 
 
Wall insulating kit: Add 10% to sale price, includes metal stud brackets with 3/4″ tongue & groove wall cover boards
Energy efficiency:  2×4 or 2×6 studs are be used to install insulation of your choice. Our solid wood walls add an additional R 4.4 and have virtually no heat or cold transfer, increasing the overall thermal and comfort benefits.
Tip: Mineral wool  insulation is recommended for log construction. It’s impervious to moisture with a higher R-value per inch than fiberglass, reduces noise levels & is environmentally friendly
Insulating the roof: Apply locally supplied materials to add rafters over the tongue & groove roof boards. The build up depth is determined by the required R-value in the ceiling to meet local building codes. High density spray foam provides maximum benefits, highest R-value for thickness & is water proof. These added rafters also increase the roof load capacity
Assembly: The model can be assembled in approximately 7 days or less with 3 people
Tip: House wraps & vapor barriers are required in most regions when insulating. Vapor barriers are installed on the warm side of walls, interior of the studs for cold climates and exterior of studs for hot climates
Building Codes: Premium series homes & cabins are manufactured to meet all structural requirements for building codes including, California Title 24, earthquake, heavy snow load regions and hurricane zones
Kit includes:
FREE SHIPPING some exceptions apply
no floor, ready to assemble on a concrete slab or wood foundation
pre-cut, numbered exterior walls
pre-cut, numbered interior walls
pre-cut, numbered gable components
vaulted, cathedral ceilings
pre-cut, 100mm x 200mm (4″x8″) numbered roof purlins, beams, spaced 558mm (22″) or less
pre-cut, numbered (18mm) 3/4″ tongue & groove roof boards
pre-cut, numbered fascia boards
4 interior doors 900mm x 2040mm (36″x80″)
1 single wide wood window 530mm x 530mm (21″x 21″)
1 single wide wood window 765mm x 990mm (30″x 39″)
3 double wide wood windows 1530mm x 990mm (60″x 39″)
2 exterior doors 950mm x 2080mm (36″x80″) 1/2 glass tempered
hardware for doors & windows
threaded steel storm rods for perimeter wall junctions
2 spare wall logs/spare roof boards
400 – 8″ log screws to connect first 2 rows,  gable components, purlins