KENTUCKY is a Premium model using 70mm (2 3/4″) wall logs.  The total footprint of this model is 32′ x 32′  for 1024 sq’ which includes the covered deck. The main building is 24′ x 32′ or 768 sq’ with 2 bedrooms, bathroom, utility room and a large open living area. The side wall height is just under 95″ with a ceiling height at the center of 16′.  The vaulted ceilings throughout provide a spacious open design. The front deck is 32′ x 8′ for a total of 256 sq’ of covered area to relax. If additional space is needed, ask us about adding a loft over the 2 bedrooms.
Wall insulating kit: Add 10% to sale price, includes metal stud brackets with 3/4″ tongue & groove wall cover boards 
 
Energy efficiency:  2×4 or 2×6 studs are be used to install insulation of your choice. Our solid wood walls add an additional R 4.4 and have virtually no heat or cold transfer, increasing the overall thermal and comfort benefits.
Tip: Mineral wool  insulation is recommended for log construction. It’s impervious to moisture with a higher R-value per inch than fiberglass, reduces noise levels & is environmentally friendly
Insulating the roof: Apply locally supplied materials to add rafters over the tongue & groove roof boards. The build up depth is determined by the required R-value in the ceiling to meet local building codes. High density spray foam provides maximum benefits, highest R-value for thickness & is water proof. These added rafters also increase the roof load capacity
Assembly: The model can be assembled in approximately 12 days with 3 people
Tip: House wraps & vapor barriers are required in most regions when insulating. Vapor barriers are installed on the warm side of walls, interior of the studs for cold climates and exterior of studs for hot climates
Building Codes: Premium series homes & cabins are manufactured to meet all structural requirements for building codes including, California Title 24, earthquake, heavy snow load regions and hurricane zones
Kit includes:
FREE SHIPPING some exceptions apply
no floor, ready to assemble on a concrete slab or wood foundation
pre-cut, numbered exterior walls
pre-cut, numbered interior walls
pre-cut, numbered gable components
vaulted, cathedral ceilings
pre-cut, 100mm x 200mm (4″x8″) numbered roof purlins, beams, spaced 558mm (22″) or less
pre-cut, numbered (18mm) 3/4″ tongue & groove roof boards
pre-cut, numbered fascia boards
4  interior doors 900mm x 2040mm (36″x80″)
7 single wide wood windows 765mm x 990mm (30″x 39″)
1 single wide wood windows 530 x 530 (21″x 21″)
2 exterior doors 990mm x 2040mm (36″x80″) 1/2 glass tempered
deck railings with vertical balustrades
adjustable posts
hardware for doors & windows
threaded steel storm rods for perimeter wall junctions
2 spare wall logs/spare roof boards
400 – 8″ log screws to connect first 2 rows,  gable components, purlins